M-Lok Angled Foregrip AFG V2 for Slim Handguard

EDIT, Jan 29, 2023: Ooops! Uploaded new ZIP file with STL, 3MF, STEP and README files. Remix of Shqype MLOK AFG With Correct Holes and Guide Tabs - https://www.thingiverse.com/thing:4639179 This is an upgrade over my M-Lok AFG Angled Foregrip. There are "wings" that wrap up around the handguard. It should fit most slim AR-15 octagonal handguards with flats that measure 17mm (0.67in) across or smaller. I also removed some extraneous faces from the CAD model, so it will print a little cleaner. I made the lugs solid, as I've had the outline-style lugs shear off. If you are not using a slim octagonal AR-15 handguard you can still use the original AFG that I uploaded, which has a flat bottom that should work with most M-Lok handguards. You can find that AFG here - https://www.printables.com/model/304426-m-lok-afg-angled-foregrip I have also uploaded a Keymod AFG. You can find the Keymod AFG here - https://www.printables.com/model/304095-keymod-angled-foregrip-afg I used the Braudel T-Nut and Screw set. They are metric, not real M-Lok spec hardware, but significantly cheaper than the real thing and they work the same. https://www.amazon.com/gp/product/B07FTCBD3L/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 Print Settings: Printer brand: Creality Printer: Ender 3 Supports: Yes Resolution: 0.2-0.24mm Infill: 60% Filament brand: Polymaker Filament color: Black Filament material: PolyLite ASA Notes: 0.2 to 0.24mm layers 100% fan for bridging, 0% fan for everything else. If you have a really good cooling duct, you can maybe use less than 100% for bridging. Use supports everywhere, with mounting surface down on build plate. 60% or greater infill Walls, top, and bottom should be 2.4mm or greater, as appopriate for your line width and layer height. LBRY Tags: afg; angled foregrip; 3d pews; guncad