print your own suppressor wipes in TPU V2 (added center hole option)

Print your own suppressor wipes in TPU Customize your own suppressor wipes. V2 (added center hole option) You can change thickness, diameter and how wide slots are and center hole. Slots and center hole can be toggled off or on in the wizard. silencers reduce noise by allowing the rapidly expanding gases from the firing of the cartridge to be decelerated and cooled through a series of hollow chambers. The trapped gas exits the suppressor over a longer period of time and at a greatly reduced speed, producing less noise signature. The chambers are divided by either baffles or wipes. There are typically at least four and up to perhaps fifteen chambers in a suppressor, depending on the intended use and design details. Often, a single, larger expansion chamber is located at the muzzle end of a can-type silencer, which allows the propellant gas to expand considerably and slow down before it encounters the baffles or wipes. See photo of scad customizer:  Don’t want to use SCAD? Paste code in the parametric Model Maker on Maker World and you can download a ready to print STL WITHOUT using SCAD https://makerworld.com/en/makerlab/parametricModelMaker like this:  LBRY Tags: suppressor; wipes; tpu; form 1; scad