Scout's SmolStop Handstop

Scout339's 'SmolStop' Hand Stop, inspired from Driven Arm's ShortStop. Requires 1x T-Nut for MLOK. For duty-grade strength, I recommend 6 walls and 50% infill. I've tested it with ASA, but PLA+ and PETG should also work, and any Filled Nylon (and possibly filled PETG? I haven't tested that enough though) will be even stronger. Print with MLOK slots facing buildplate (upside-down) or at a slight angle for best results. Fuzzy Skin Settings used in second picture are as follows: 0.1mm layer height 0.2mm thickness 6mm density Happy shooting! ---------- Licensing: The SmolStop by Scout339 is licenced as follows: Creative Commons (4.0 International License) Attribution—Noncommercial—Share Alike https://creativecommons.org/licenses/by-nc-sa/4.0/ LBRY Tags: grip; mlok; handstop; file; 3dprinting