UFA gambino

</START UFA UPDATE> UFA-Compliant Gambino by Black Lotus Coalition Black Lotus Coalition Presents The Gambino V2 Now UFA Compliant Release Date: April 13th, 2023 PURPOSE: In the USA, the Undetectable Firearms Act (UFA) requires all firearms to be at least as detectable as a security exemplar Derringer containing 3.7 oz (105 g) of metal content. See more here: https://en.wikipedia.org/wiki/Undetectable_Firearms_Act INTENT: Trollwerks says, "You can't print in prison. Choose & fight your battles wisely. Don't die on the 'Fuck the UFA' hill. We got bigger battles ahead." CHANGES: This UFA-compliant update uses the base Gambino version 1.7 and incorporates the following changes: - Modified the frame and grips to hold a 4.0 ounce engravable steel grip weight measuring 35mm x 35mm x 12.7mm (1/2") with 6mm radiused corners for compliance with the U.S. Undetectable Firearms Act (UFA). This is the same weight as used on the UFA-compliant Cabfare and this weight alone exceeds the 3.7 ounces of metal incorporated in the exemplar Derringer referenced in the UFA. A .DXF of this weight can be found in the files and should be cut of half inch mild steel or stainless steel (California, others?) - added windowed grip panels with a window measuring 18mm x 25mm as an option to show off any engraving to help comply with state or local laws. CREDITS: UFA Compliant Version Dev Team / thanks to: Original Gambino work by NameisNight BLC overmind assimilation by Moderator Gage UFA CAD work heavy lifting by MadMax UFA-compliant concept, beta testing, and hardware kits by Trollwerks Emotional support and a splash of actual CAD work this time by TooAceForThisShit Beta Testers all of the above plus 3DG, Here2printeverything BUILD ADVICE: For full UFA compliance, it is recommended to use JB weld to glue the steel weight to either the left 1/2 frame and left grip OR right 1/2 frame and right grip. This should be considered a permanent fixture that still allows you to remove the other half (grip & frame) to conduct maintenance on springs and other internals. CONVENIENCE / HARDWARE KITS: As of this release, https://www.trollwerks2a.com (USA Only/VPN Off) sells “print & play” hardware kits for both the short- and long-barreled variants that include a ~4oz laser cut steel grip weight for simple UFA compliance as well as rifled & chambered barrel liners, screws, nuts, springs, and a "drilled dime" breech reinforcement. Just add plastic! Base model notes follow: </END UFA UPDATE> A Remix of punk juggle's Cabfare 22lr Pistol by nameisnight Release Date: 02/23/2022 Latest Update: 03/05/2022 While I like the original version of the Cabfare I found some issues and things I wanted to change, so I remixed it, now calling it the Gambino 22lr. ============================== !! READ ME !! ============================== Only use proper 22lr Barrel Liners with Rifling, Otherwise its Illegal and Dangerous Only use Strong Epoxy such as JB Weld or Lock tight for the Barrel and Dime Breech For first shots use a empty 22lr shell will bullet and gunpowder removed, Check for Issues. For second shot use a Sub-Sonic 22lr bullet and fire remotely or at least use thick gloves and safety glasses, Check for issues. If all pass and the gun does not show any cracks, brakes or issues, Shoot with caution and always check the gun for issues. =========================================================================== Along with all the required parts from the original package (1.2) you will need the following 1 US Dime (.10c) 1 Drilling Tool 1 3.5 mm Drill Bit 1 6 mm Drill Bit Use PLA+ or Stonger, 100% Infill, 20 Walls, No Brim, No Raft, No Supports. .20 = OK .16 = GOOD .12 = BEST You will need to print x1 Left Frame x1 Right Frame x1 Left Grip x1 Right Grip x2 Striker Grips x1 Sear x1 Trigger x1 Striker x1 Take down x1 Dime Jig All other files are Optional ======================================================================= Build Instructions ======================================================================= Threaded Barrel: Print at 100% infill, Max walls and Vary high resilution for the threads. Recommend .12 or lower. Supressed Barrel: Print Settings: PLA+ or Stronger .16 or Lower Detail 100% Infill 20 Walls Top and Bottom Print front down on bed NO Supports Build: Use a 65mm 22lr Rifled Barrel Liner with a OD of 8mm Use a 8mm drill bit to pre-drill the hole in the barrel from the breech side down, keep stright! Use pliers or sandpaper to scratch the outside of the barrel for more surface area Use 2 part strong Epoxy (JB Weld, Locktight, etc) and wipe the barrels outside with a generus layer Press the barrel into the barrel body from the breech side, make sure end of liner is level with the barrel frame! Clean leftover Epoxy, If some epoxy gets in the barrel liner clean out. NOTICE: Please now your laws before printing, This is a NFA item in the United States! Be sure that your b